Very suitable for adding sound ambience in event halls and summer terraces. Very discreet, it offers crystal-clear and evenly distributed sound.
The EARTH version of the OMNIONDA series is placed on the floor or raised on podiums.
They can be used as permanent installations, but were designed with portability in mind.
Very suitable for adding sound ambience in event halls and summer terraces, it is very discreet and offers crystal-clear and evenly distributed sound.
It can be used on stages to reproduce sound for both the performers and the audience.
Distributed in multi-speaker areas, they create the magical ambience of omnidirectional sound.
Two OMNIEARTH devices can be stacked to reinforce the sound in a particular location.
| Characteristics | Value |
|---|---|
| Freq. Range | 55 Hz – 18 KHz. |
| Mains | Universal Switch Power Supply 85-285V / 45-65 Hz |
| Horiz. Coverage | 360° |
| Average current draw | 0.7A (Heavy duty musical program) |
| Vert. Coverage | 60° Nominal |
| Built-in DSP | 48 bit processing includes factory presets |
| Maximum SPL | 127 dB @ 1 m. (3.3 ft.) |
| AD/DA converters | 24 bit – 48 KHz |
| LF-MF Driver | 12”, 3” voice coil, Neodymium magnet |
| Standby mode consumption | <5 W | HF Driver | 1” exit, 1.75” titanium diaphragm. Neodymium |
| Adjustable Delay line | 118 MS / 40 m. |
| Amplifier Power LF | 375 W AES Class D Amplifier |
| Connectors | 1x XLR input link, 1x XLR output |
| Amplifier Power HF | 125 W AES Class D Amplifier |
| Finish | Multi-layer birch plywood with high resistant black Polyurea coating |
| Total outputs amplifiers | 1000 W @ 4 Ohms |
| Dimensions (HxWxD) | 580 x 460 x 460 mm. / 22.83″ x 18.11″ td>20 dBu |
